Rigging and Lifting
Who this course is for
This program is excellent for every employee in all disciplines.
Lesson 1Rigging Fundamentals
Prerequisites: No formal prerequisites are required. However, a basic understanding of industrial maintenance operations and lifting equipment such as cranes, hoists, or lifting devices will help learners better understand rigging principles and safe lifting practices.
Rigging Fundamentals introduces technicians to the principles and safe work practices required to plan and perform routine rigging operations in industrial environments. The course explains the responsibilities of the rigger, proper load evaluation, center of gravity, sling selection, hitch configurations, load angles, and equipment rated capacities. Learners explore the inspection and safe use of wire rope, synthetic, and alloy chain slings, rigging hardware, and below-the-hook lifting devices while emphasizing lift planning, communication, hazard recognition, and OSHA/ASME safe work practices. Upon completion, learners will have a solid foundation for safely preparing, inspecting, and executing common lifting operations while helping reduce the risk of equipment damage and personnel injury.
What you'll be able to do:
- Explain the responsibilities of a rigger and the fundamentals of safe rigging operations
- Determine load weight, center of gravity, sling angle, hitch configuration, and equipment capacity requirements prior to a lift
- Identify common rigging hardware, sling types, and below-the-hook lifting devices used in industrial lifting applications
- Inspect slings, hardware, and lifting accessories to identify damage, wear, and conditions requiring removal from service
- Explain the effects of sling angles, hitch configurations, and load distribution on lifting capacity
- Describe proper lift planning, site surveys, communication methods, and the use of tag lines during lifting operations
- Recognize critical lifts, common rigging hazards, and the causes of rigging failures
- Apply OSHA, ASME, manufacturer, and facility safe work practices before, during, and after lifting operations
Lesson 2Hand Operated Equipment
Prerequisites: This course is designed so that no prior knowledge is required.
This course shows how to prepare for and carry out a lift using a hand-operated hoist. The course describes different types of lifting equipment and when each type would be used. The course also focuses on procedures for planning a lift, inspecting equipment, and performing a lift.
What you'll be able to do:
- Identify and explain the operation of different types of hand-operated hoists
- Identify and explain the function of components on the different hoists, including hooks, shackles, slings, and eyebolts
- Plan a lift using a hand-operated hoist
- Inspect hoists, wire rope slings, man-made fiber slings, trolley, shackles, eyebolts, and other related equipment
- Install necessary equipment
- Perform a lift
- Invert a load using two chain hoists
Lesson 3Forklifts and Cranes
Prerequisites: This course is designed so that no prior knowledge is required. However, a familiarity with the basic operation of forklifts and mobile cranes is recommended.
This course provides procedures for the safe and efficient operation of forklifts and mobile cranes. The course covers specific aspects of operation such as inspections before use and communication during operation, as well as the actual steps involved in lifting and moving loads.
What you'll be able to do:
- Perform a visual inspection and an operational check of a forklift
- Safely maneuver a forklift indoors
- Properly unload, lift, stack, and unstack pallets
- Perform static and operational inspections of a mobile crane
- Properly use and interpret signals when operating a mobile crane
- Determine the load limit for a boom extension and angle by using load limit and angle charts
- Describe the procedures involved in performing a lifting operation with a mobile crane
Lesson 4Ladders and Scaffolding
Prerequisites: This course is designed so that no prior knowledge is required.
This course explains how to select, inspect, and safely use both ladders and scaffolding. The course focuses on the application and safe use of single, extension, and step ladders in addition to the procedures for assembling tubular welded frame scaffolding.
What you'll be able to do:
- Identify the components of a single, extension, and stepladder
- Select the correct ladder taking length, weight, and type of material into account
- Inspect ladders
- Determine the correct angle to set the base
- Raise and lower ladders according to safety procedures
- Inspect and assemble tubular welded frame scaffolding
Start learning Rigging and Lifting
Get this course and the entire library with one ITC Academy plan.
Get started